Leaking Las Vegas Water Heater Pressure Relief Valve

Posted by on Dec 9, 2014 in Gas Water Heater Repair Las Vegas, Water Heater Repair Las Vegas

The pressure relief valve of a water heater has an important task – ensuring the water heater tank does not blow up. So with that in mind, Water Heater Repair Las Vegas wants to make certain homeowners know how to best take care of it. They will certainly leak when the valve breaks or when the water storage tank pressure gets higher then the relief point.Hot Water Heater Repair Las Vegas

We recommend that at least twice a year, house owners test to ensure the pressure relief valve, or T&P valve as we will call it, is working properly. All one needs to do is raise the manage for a couple of seconds and let go of it. It ought to snap back to its original position. When it is raised, one may hear the sound of pressure being released , much like the sound of air coming out of a tire pump when being detached. Likewise, a little water might come out too. Both are typical. If the valve has not been tested for a number of years, it may stick at first also.

However, if the handle doesn’t snap back, or if it continues to leak some water, that is not regular. If it still leaks some, raise the handle a few more times to see if it will re-seat itself. You could want to wait a day or so it see if it re-seats itself prior to presuming it needs to be replaced.

Water Heater Repair Las Vegas would prefer to manage any T&P valve replacements for you, so though water heaters are normally relatively upkeep free, there are some safety precautions one must bear in mind. With that here is a summary of a pressure relief valve replacement.

1. The gas to the water heater has to be turned off, or the breaker for an electrical water heater.
2. The cold water cut-off valve has to be closed next.
3. The valve below the T&P valve has to be opened to drain a little water in order to relieve some of the pressure in the storage tank.
4. The overflow pipe of the T&P valve needs to be taken off. It may have to be cut off if it is soldered or securely glued.
5. The pressure relief valve has to be unscrewed with a pipe wrench.
6. Wrap the new T&P valve with Teflon tape and screw it in place. Ensure the overflow pipe opening is placed away from the storage tank.
7. Reattach the drain pipe, also making use of new Teflon tape.
8. Turn the water back on, and examine your work for any leaks.

The following video offers an overview of this process: